camcorder stabilizerYou’ve learn exactly about them, you’ve searched the net, evaluated prices and now have reached the conclusion that for the total you’re spending, camera stabilizers seem like a good enough idea. So, you consistently wait for your purchase as soon as delivery comes, you happily tear in the box. Then, for the life of you, you can’t get the dratted thing to balance. This seems to be the most popular subject matter in ‘help’ sections in and around videography discussion boards all over the Internet. How does one manage to get their camera stabilizers to work appropriately or at all-they need to start at setting it up well-balanced first, correct? Before you get annoyed as well as throw it all irritated golfer having a club; or maybe much worse, before experimenting with your camera stabilizer’s weights and finding the accessory going topsy-turvy and with your camera possibly ending up on the cement pavement, get a grip on be simple guiding principle behind your video camera stabilizer in order to take control of it very quickly. You don’t need to break open your secondary school physics books but it does relate with that one branch of science. Imagine a seesaw at the play area; it’s a wooden plank having a post that acts as a pivot point (or fulcrum) in the center. If you place two equal weight loads on the reverse ends, and since the fulcrum is equidistant from both sides, the plank will probably balance at a level place. If we make either side of the balanced plank heavier, that side will drop lower and the other will likely move higher. The seesaw plank is now out of balance. If maintaining the same weight on each side of the plank isn’t a choice, then you’ll not obtain balance unless you change the fulcrum point (your seesaw’s post, remember?); by nudging it nearer to the heavier side of the plank, you can attain a point exactly where it could once again level out to a balanced location. You can employ this very same principle to guide you when controlling your video camera stabilizer; however, you need to determine where the fulcrum point is on the digital camera you’ll be utilizing on the stabilizer. Determining where the center of balance is in your digicam or camcorder is very important and you have to do it with electric batteries, tape, disc, or card, and other things that you’ll use during a shoot, all in.